in wash, rinse, or spin cycles. I believe I see the red handle on left and blue on right. Hook the U-shaped hose over the edge of a laundry tub. Lay the drain hose in the open channel of the form so that the hose creates a U-shape. Reach behind the washer and grab your drain hose. Determine where on the wall to install the upright. This usually is PVC plumbing pipe that stands approximately 3 feet above the floor level, with an elbow at floor level leading to the floor drain. Loosely attach the drain hose to one of the laundry tub legs with a tie strap. Loosely attach the drain hose to the stand pipe or washer supply hoses with a cable tie to keep the hose from slipping from the pipe or wall. Unplug your washer from the wall outlet. Dont lay the hose on the floor.
Which is typically high enough to avoid the washer from siphoning the water out. This is the proper hook up and gay boy hookup installation of the washer water supply hoses and washer drain hose. Insert one end of the T-shaped siphon break into one end of the drain hose. They had just laid the drain hose on the floor next to the floor drain. As long as there is no obstruction in the drain pump, you can lay the drain hose on the floor next to the floor drain to drain the washer. If your washer doesnt have a preinstalled drain hose, connect the supplied hose to the machines drain opening. Insert the end of the hose and the hose form into the stand pipe or wall drain pipe. Especially important in dry climates where the water can evaporate quite quickly).